For more information, visit https://linemarkingequipment.com.au
Graco GrindLazer Pro DC1013 G DCS
The Graco GrindLazer Pro DC1013 G DCS displays the same performance as the Graco GrindLazer Pro DC1013 G but has an electric start and a depth control system.
For areas of ever-changing terrain the DCS is invaluable allowing the operator to use the easy cutter depth control “dial down” for precise cutting depth with multiple position control options. The depth controller provides total operator control over the cut depth while keeping both hands on the GrindLazer.
The robust design of the DCS stands up to harsh abuse with fully encapsulated electronic components, ultimate protection from vibration, jobsite and weather conditions.
A further advantage of the DCS is that it eliminates damage due to dropped drums. Highly recommended for areas of uneven terrain.
Product Specification
Max Cut Width |
10″ (25.4cm) |
Cut Direction |
Forward |
Removal Rate Walk/Ride |
700sq ft/hour |
Engine |
13 HP Honda |
Dry Weight |
118 kg |
Download Brochure
Cutting Drum Options
Part no. |
Cutter type |
Profile |
Cut width |
25M950 |
Wire brush |
Fine |
8″ |
25N069 |
Steel star |
Fine |
8″ |
25N070 |
Steel star |
Fine |
5″ |
25N071 |
Steel star |
Medium |
8″ |
25N072 |
Steel star |
Medium |
5″ |
25M946 |
Steel beam |
Fine |
8″ |
25N077 |
Steel beam |
Fine |
5″ |
25N078 |
Steel beam |
Medium |
8″ |
25N079 |
Steel beam |
Medium |
5″ |
25N091 |
Carbide flail 6pt |
Fine |
8″ |
25N092 |
Carbide flail 6pt |
Fine |
5″ |
25M936 |
Carbide flail 6pt |
Medium |
8″ |
25N093 |
Carbide flail 6pt |
Medium |
5″ |
25N094 |
Carbide flail 6pt |
Coarse |
8″ |
25N095 |
Carbide flail 6pt |
Coarse |
5″ |
25N098 |
Carbide flat |
Fine |
8″ |
25N099 |
Carbide flat |
Fine |
5″ |
25M938 |
Carbide flat |
Medium |
8″ |
25N100 |
Carbide flat |
Medium |
5″ |
25N107 |
Carbide flat |
Coarse |
8″ |
25N108 |
Carbide flat |
Coarse |
5″ |
25N112 |
Carbide-tipped miller |
Fine |
8″ |
25N113 |
Carbide-tipped miller |
Fine |
5″ |
25N114 |
Carbide-tipped miller |
Medium |
8″ |
25N115 |
Carbide-tipped miller |
Medium |
5″ |
25M940 |
Carbide-tipped miller |
Coarse |
8″ |
25N116 |
Carbide-tipped miller |
Coarse |
5″ |
25N119 |
Full carbide miller |
Fine |
8″ |
25N121 |
Full carbide miller |
Fine |
5″ |
25N122 |
Full carbide miller |
Medium |
8″ |
25N123 |
Full carbide miller |
Medium |
5″ |
25N124 |
Full carbide miller |
Coarse |
8″ |
25N125 |
Full carbide miller |
Coarse |
5″ |